Galvanized Steel Bottom Guide Profile with Holes for Cantilever Sliding Gate 80×80×5 mm – 6.0 m

Galvanized Steel Bottom Guide Profile with Holes for Cantilever Sliding Gate 80×80×5 mm – 6.0 m
Product code: H/02-80x80x5-Zn-D-6000

The galvanized steel guide profile with mounting holes is designed for cantilever sliding gates and ensures stable guidance and smooth movement of the gate leaf. Thanks to its robust construction with a wall thickness of 5 mm, galvanized surface, and mounting holes, it is primarily suitable for screwing to the gate frame. It allows installation without the need for direct welding of the profile to the frame.
For designing the running system, use the Gate Dimensioning tool.

Material
Structural steel.

Surface finish
Galvanizing for corrosion protection of the steel surface.

Dimensions and technical parameters
Product type: bottom guide profile for cantilever sliding gate.
Profile dimensions: 80 × 80 mm.
Wall thickness: 5 mm.
Length: 6 000 mm.
Design: with mounting holes.
Surface finish: galvanizing.
Mounting: preferably by screwing to the gate frame.
Application: cantilever sliding gates.

Mounting and compatibility
The profile is primarily intended for screw fastening to the frame of a cantilever sliding gate via the mounting holes. It is used with compatible support carriages that ensure the guidance and movement of the gate leaf. When designing the running system, it is necessary to select carriages and other components corresponding to the passage width and gate weight. To select the appropriate assembly, use the Gate Dimensioning application. The rack is mounted on the outer side of the profile.
In case of welding galvanized parts, safety precautions must be observed to protect against fumes from the zinc layer, and after welding, damaged areas of the surface finish should be appropriately treated, for example, with zinc repair spray (product code J08/03-Zn gray).

Advantages
Robust steel construction with a wall thickness of 5 mm.
Galvanized surface for corrosion protection.
Mounting holes for easier screw fastening to the gate frame.
Stable guidance and smooth movement of the gate leaf.
Suitable for manufacturing new gates and renovating existing gate systems.
Length of 6 m for manufacturing a cantilever sliding gate.